Announcement

Collapse
No announcement yet.

UT3 Gamepad Problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • replied
    Originally posted by daaceking View Post
    ut3 has full compatibility with xbox 360 controller, so you just go ahead and play.
    which version #patch have you installed to get rumble working on your Xbox 360 gamepad?

    Cheers

    Leave a comment:


  • replied
    great! it always seems to be that option, no matter how unlikely it seems. it was a solution to my problem and your problem, and considering these are the only 2 gamepad problems i have come across, that's a 100% success rate.

    Leave a comment:


  • replied
    oh WOW! somehow it works now...i guess changing my controller from dualshock 2 to the first dualshock made a difference. thanks for your help, splitscreen works great!!!!

    Leave a comment:


  • replied
    control panel as in windows xp. it may be different for vista. i just want you to go to the controller section

    Leave a comment:


  • replied
    Originally posted by daaceking View Post
    you know in the config file? it has 7 values you can choose right? (i think)

    i would recommend changing it and then test in ut3, then change again, and test it ut3.

    if it still doesn't work, can you change the controller type in the control panel, controller's section?

    my gamepad doesn't work in pc mode but works in ps2 mode

    if you still can't get it to work, you can get a xbox 360 controller, which should work but i haven't tested, or you can get the firestorm dual power 4 pc controller, that's the one i have and tested. it as similar layout to ps2 controller. the rubbery material is quality but the buttons seem rather cheap. but it's good enough for me. it has two individual vibration motors for force feedback no batteries
    i dont understand the control panel part, is that in my computer or ut3 options???

    Leave a comment:


  • replied
    you know in the config file? it has 7 values you can choose right? (i think)

    i would recommend changing it and then test in ut3, then change again, and test it ut3.

    if it still doesn't work, can you change the controller type in the control panel, controller's section?

    my gamepad doesn't work in pc mode but works in ps2 mode

    if you still can't get it to work, you can get a xbox 360 controller, which should work but i haven't tested, or you can get the firestorm dual power 4 pc controller, that's the one i have and tested. it as similar layout to ps2 controller. the rubbery material is quality but the buttons seem rather cheap. but it's good enough for me. it has two individual vibration motors for force feedback no batteries

    Leave a comment:


  • replied
    Originally posted by daaceking View Post
    here is the link

    http://www.orbitfiles.com/download/id4377079196.html

    it has all the files you need. just copy the files to the main folder where the ut3 exe is.

    it has 4 player support (player 1 is keyboard and mouse NOT gamepad, players 2 3 4 are gamepad.)

    it should work with the gamepad you mentioned, i configured for ps2. obviously i couldn't configure the triggers properly because ps2 doesn't have triggers right? so they're set as normal buttons.

    rumble supported

    they may not be to your liking, i have just configured to similarity of the xbox360 controller and ps2 controller.
    well thanks but **** ut3 is being stupid with my controller. yet these settings dont work either, i have also changed the settings on the analog so it is correct on the test, but yet when i play ut3, my right analog stick is left going up and down going right. it worked perfectly in the test.exe but ut3 is just making it frustrating. i tried ur original settings too, nothing at all. ,aybe im the only person hat this doesnt work for. the anlogs are the problem, there all inverted!!!1

    Leave a comment:


  • replied
    here is the link

    http://www.orbitfiles.com/download/id4377079196.html

    it has all the files you need. just copy the files to the main folder where the ut3 exe is.

    it has 4 player support (player 1 is keyboard and mouse NOT gamepad, players 2 3 4 are gamepad.)

    it should work with the gamepad you mentioned, i configured for ps2. obviously i couldn't configure the triggers properly because ps2 doesn't have triggers right? so they're set as normal buttons.

    rumble supported

    they may not be to your liking, i have just configured to similarity of the xbox360 controller and ps2 controller.

    Leave a comment:


  • replied
    the app works for splitscreen i have tried it. i have done a successful 2 player split screen. i haven't tried 4 player but it should be possible.

    the default config won't work. you have to customize it to your unique gamepad. my gamepad config isn't for dualshock, it's just a similar gamepad.

    this is what you must do. firstly, in the readme it says there is a file that can have several names (different for each game) so copy and paste the file and give it the filenames mentioned in the readme.

    you have to edit the config file and test if the gamepad works to your liking using the test utility. make sure gamepad is player 2 not player 1. (configurable through the config file.)

    after this, copy the contents of the folder to your ut3 directory. then run ut3 and use command "debugcreateplayer 1" for a 2 player split screen "setsplit 1" for horizontal split or "setsplit 2" for vertical split

    edit:i'll make a config file for you. no guarantees it will work because it not the same gamepad, just similar. how many player you want?

    Leave a comment:


  • replied
    xbox 360 emulator can help for appearing joypad in game.. but it doesnt help us to play splitscreen..

    Leave a comment:


  • replied
    Originally posted by daaceking View Post
    ut3 has full compatibility with xbox 360 controller, so you just go ahead and play.

    the solution thing was for the playstation type controller

    there is a program called "xbox 360 controller emulator"
    this is a great piece of software. ut3 fully supports xbox 360 controller so tricking the game into thinking you have an xbox 360 controller is a great idea. that is what the software does. i have tested it. it WORKS
    give me your configuration file for xpadder using the ps2 dualshock. for some reason, i got mine off a site and its way messed up in ut3. it wroks 100 percent in the test but in ut3 the controls are all messed up!

    Leave a comment:


  • replied
    ut3 has full compatibility with xbox 360 controller, so you just go ahead and play.

    the solution thing was for the playstation type controller

    there is a program called "xbox 360 controller emulator"
    this is a great piece of software. ut3 fully supports xbox 360 controller so tricking the game into thinking you have an xbox 360 controller is a great idea. that is what the software does. i have tested it. it WORKS

    Leave a comment:


  • replied
    Originally posted by daaceking View Post
    are you sure xbox 360 gamepad emulator doesn't work? i have a controller than has buttons same position as ps 1/2/3 version and can be switched from a pc gamepad to a playstation one. pc mode is buggy but ps version is perfect and i have tested it with ut3. it even has force feedback!!! did you use the test exe to make sure it worked, then put all the files in ut3 directory including the file which needs to be renamed to several names?
    what did u just say???? xpadder doesn't work for me, even the test.exe works but then ut3 inverts all the controls. **** utinput.ini changing it doesnt work. i just wanna do splitscreen with kb/m and then player 2 is joypad that works. if i buy an xbox 360 controller, it would work right?

    Leave a comment:


  • replied
    are you sure xbox 360 gamepad emulator doesn't work? i have a controller than has buttons same position as ps 1/2/3 version and can be switched from a pc gamepad to a playstation one. pc mode is buggy but ps version is perfect and i have tested it with ut3. it even has force feedback!!! did you use the test exe to make sure it worked, then put all the files in ut3 directory including the file which needs to be renamed to several names?

    Leave a comment:


  • replied
    i tried xpadder.. its work for unsupperted games.. but still cant play like that-->

    http://pcsplitscreen.freehostia.com/Unreal.htm

    Leave a comment:

Working...
X