WebAdmin v1.5 - 2008-08-08 (requires UT3 patch 1.3)

[HKLM]

Can't figure out what I did wrong and want to get server back up and going. So, I installed a fresh ini and left the Vote Duration at 45. All is well, but it still bugs me that I didn't find out exactly what caused the problem.

Thanks to everyone for their patience in wading through my frantic posts on this subject and thanks again to El Muerte for his wonderful Web Admin.

CL

I am having the exact same problem as you have described in your prior posts, only I'm using the latest version of the webadmin 1.8.
Did you ever find out a way to fix the "very long delay/or infinate delay in changing maps, after voting countdown reaches 0 at the end of the match"? Works perfectly in mid-game voting...

[JD8]

Also just a suggestion - how about placing the version of webadmin on the actual web admin page? That way a person log into their webadmin after upgrading they can tell if it worked or if they are using an old version.

Open WebAdmin and look at the bottom of the page, you should see "About the UT3 WebAdmin" Click on it and you will see a host of information including current version number.

[Netforce]

Great tool. Thanks for making it.

Just one question. I've used version 1.2 forward and everytime there is a new release I go through the steps to setup the webadmin. when upgrading do you have to go through all the server restarts/stops as indicated in the sticky? The reason I ask is I always go through those steps, but my files haven't changed. when I stop the server upload the new files and then restart. My UTWeb.ini is the same as it was before. The same when I check my webadmin.ini. So my question is - when upgrading from a previous version do we only have to copy the new files?

Also just a suggestion - how about placing the version of webadmin on the actual web admin page? That way a person log into their webadmin after upgrading they can tell if it worked or if they are using an old version.

Just a suggestion. great tool. Thanks for creating and releasing to the public.


Netforce.

[cRaZyLaDy*SIG*]

Can't figure out what I did wrong and want to get server back up and going. So, I installed a fresh ini and left the Vote Duration at 45. All is well, but it still bugs me that I didn't find out exactly what caused the problem.

Thanks to everyone for their patience in wading through my frantic posts on this subject and thanks again to El Muerte for his wonderful Web Admin.

CL

[cRaZyLaDy*SIG*]

Thanks, El Muerte for your continued work on Web Admin and the fine job you are doing. I was excited to see that Mid-Map Vote was available and installed both the Patch 3 and this latest Web Admin. However, I am having difficulting getting Mapvote to Work Properly.

All seems to be OK with mid-map voting. I have only been able to test it methodically with 3 players on, but we three were able to successfully vote 2 to 1 for a map mid-map. The trouble showed up at the end of maps. We would vote 2 to 1 for a map (just as we had done for mid-map voting) and the countdown would begin, but when it reached zero, nothing happened. The game stayed on the current map and didn't change to either the map voted for or the next map in rotation. Let me add that the same situation occurred when it was just I, alone, on the server.

Here are my settings:

Allow Map Voting: yes
Allow Mid-Game Voting: yes
Mid-Game Vote Delay: 25
Minimal Votes: 1
Vote Duration: 30
Vote Percentage to Change Map: 66


I'm wondering if I have a conflict between the countdown and some other setting, but I haven't seen it and may be looking in the wrong places.

Well, I thought I had this problem cornered and that BR was the culprit. Now I have a slightly different problem with other gametypes besides BR. The Vote Duration figure I set works just fine in mid-map vote but when a map finishes, the countdown begins from 124. I have searched and replaced all map duration figures occurring in the game ini file to match the one set in web admin, but it doesn't seem to make any difference. I even tried figures below and above the 30, but it didn't make any difference. Heeellllp!

[elmuerte]

On linux (well, any non-windows OS) only root may bind ports below 1024, of course you shouldn't run a game server as root.

[airbat]

Here you can see the server version

Engine Version
    3542

So ... i'm a poor noob because i have downloaded the last server from icculus but this is the 1.2 release from 02022008 ....

Really sorry guys

EDIT :
So, after server update all works fine but i must set listenport to 8080 to make it bindable ... don't know because it can't use 80 but i haven't any other webserver on my gameserver.

All works fine

[Flak]

Thank you ElMuerte

[elmuerte]

Are you sure you updated to UT3 patch 1.3?
Because those settings are only available in 1.3, it's not a configuration file issue, it's literally missing functionality in the game instance. Check the "about" link in the webadmin to make sure you have UT3 version 1.3 (engine version 3601)

[airbat]

Hi all,
I've got a problem with the WebAdmin release 1.5 and my Linux Dedicated Serveur 1.3.
I've got some errors occurs when is clic on SETTINGS in the webadmin interface.
Here is the log :

Warning, Missing BoolProperty UTGame.UTGame:bMidGameMapVoting referenced by package 'WebAdmin'
Warning, Missing IntProperty UTGame.UTGame:MapVotePercentage referenced by package 'WebAdmin'
Warning, Missing IntProperty UTGame.UTGame:MinMapVotes referenced by package 'WebAdmin'
Warning, Missing IntProperty UTGame.UTGame:InitialVoteDelay referenced by package 'WebAdmin'

When is see the errors, i decide to put this options on my UTGame.ini in the original folder and the hidden folder.
Here is my new UTGame.ini.

[UTGame.UTGame]
BotRatio=+1.0
GoalScore=25
bTournament=false
bPlayersMustBeReady=false
NetWait=15
ClientProcessingTimeout=30
RestartWait=30
MinNetPlayers=1
bWaitForNetPlayers=true
LateEntryLives=1
TimeLimit=20
GameDifficulty=+5.0
EndTimeDelay=4.0
bAllowMapVoting=true
VoteDuration=45
WebServerClassName="UWeb.WebServer"
+GameSpecificMapCycles=(GameClassName="UTDeathmatch",Maps=("DM-Arsenal","DM-Biohazard","DM-Sanctuary","DM-Deck","DM-Defiance","DM-Deimos","DM-Diesel","DM-Gateway","DM-HeatRay","DM-Fearless","DM-RisingSun","DM-Sentinel","DM-ShangriLa","DM-Carbonfire"))
+GameSpecificMapCycles=(GameClassName="UTTeamGame",Maps=("DM-Arsenal","DM-Biohazard","DM-Sanctuary","DM-Deck","DM-Defiance","DM-Deimos","DM-Diesel","DM-Gateway","DM-HeatRay","DM-Fearless","DM-RisingSun","DM-Sentinel","DM-ShangriLa","DM-Carbonfire"))
+GameSpecificMapCycles=(GameClassName="UTCTFGame_Content",Maps=("CTF-CircuitBreaker","CTF-Coret","CTF-Hydrosis","CTF-Reflection","CTF-Vertebrae","CTF-OmicronDawn","CTF-Strident"))
+GameSpecificMapCycles=(GameClassName="UTVehicleCTFGame_Content",Maps=("VCTF-Kargo","VCTF-Suspense","VCTF-Corruption","VCTF-Containment","VCTF-Sandstorm","VCTF-Necropolis"))
+GameSpecificMapCycles=(GameClassName="UTOnslaughtGame_Content",Maps=("WAR-Downtown","WAR-SinkHole","WAR-Dusk","WAR-Islander","WAR-Avalanche","WAR-MarketDistrict","WAR-OnyxCoast","WAR-Powersurge","WAR-Serenity","WAR-FloodGate","WAR-Torlan","WAR-TankCrossing"))
MaxCustomChars=12
bMidGameMapVoting=true
MapVotePercentage=70
MinMapVotes=1
InitialVoteDelay=30

I've tried to put those arguments directly in the command line.

So, all of this modifications don't works and the server crash with always that **** errors

Can someone help me ?

PS : Sorry for my bad english.

[cRaZyLaDy*SIG*]

hey CL
change Vote Percentage to Change Map: 66
to
Vote Percentage to Change Map: 50
and try again with 2 to 1

Thanks for the suggestion, Loco. However, it proves out that I posted this thread prematurely and I apologize profusely for that.

I had been testing mapvote on the gametype we had been running on our event server, which was BR. When we switched to CTF tonight as we did further testing, we were able to vote successfully both atmid-map and end of map - same with DM. I understand that the version of BR we are running is not made for Patch 3. It had worked so well in spite of that that I forgot about it when I was puzzling about the mapvote issue. Again, my apologies to everyone.

[unrealloco]

hey CL
change Vote Percentage to Change Map: 66
to
Vote Percentage to Change Map: 50
and try again with 2 to 1

[cRaZyLaDy*SIG*]

Thanks, El Muerte for your continued work on Web Admin and the fine job you are doing. I was excited to see that Mid-Map Vote was available and installed both the Patch 3 and this latest Web Admin. However, I am having difficulting getting Mapvote to Work Properly.

All seems to be OK with mid-map voting. I have only been able to test it methodically with 3 players on, but we three were able to successfully vote 2 to 1 for a map mid-map. The trouble showed up at the end of maps. We would vote 2 to 1 for a map (just as we had done for mid-map voting) and the countdown would begin, but when it reached zero, nothing happened. The game stayed on the current map and didn't change to either the map voted for or the next map in rotation. Let me add that the same situation occurred when it was just I, alone, on the server.

Here are my settings:

Allow Map Voting: yes
Allow Mid-Game Voting: yes
Mid-Game Vote Delay: 25
Minimal Votes: 1
Vote Duration: 30
Vote Percentage to Change Map: 66


I'm wondering if I have a conflict between the countdown and some other setting, but I haven't seen it and may be looking in the wrong places.

[dirrty[starbuck]]

just curious if I need to have 1.3/4 in prior to adding 1.5 or if 1.5 is stand alone?

As indicated in the title of this thread: WebAdmin v1.5 - 2008-08-08 (requires UT3 patch 1.3)

Each version of WebAdmin released by elmuerte is always a full install - You do not need a previous version of WebAdmin installed in order to install the latest.

[dave neun]

DOH... nevermind, always a good idea to read the read me. Clearly states needs v1.3 meaning version 1.3 of the webadmin not official patch 1.3.

again great job man!

dave