Announcement

Collapse
No announcement yet.

Translocator Question???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Translocator Question???

    hi whats up all, i'm running 2 different kind of servers and in my super weapon server i want my translocator to have infinate ammo so it don't run out.....so could someone tell me how to make my trans to become ammo infinate....or or if you could send me the beam me up scottie translocator it would be greatly appreciated....thanx in advance

    rob

    #2
    yo you can down load a TL Mutator to do just that and more it called tlmutator2.6 here a link to it

    TLMUTATOR LINK

    Comment


      #3
      yeah the tlmutator 2.6 is sweet i run on a couple of my servers if you ahve any issues with it let me knwo via email or post here ..ill help you if get hooked up on something

      Comment


        #4
        ok...i'm goin to check it out...thanx alot guys...i'll post again to let u guys know how it goes...thanx again...appreciate it

        Comment


          #5
          ok guys i can't get it to work.....i think there is suppose to be an ini file for the trans and i do not have one and also the file i downloaded from you at the ut2003hq site does not come with a ini file for the trans.....and also when u put it in your commandline to run the server how exactly do u enter it as a mutator...i put mutTLMutatorV26 and it will not work....but i know i have to have an ini file also so i can change the settings for it....where do i get the ini file at??

          Comment


            #6
            command line mutator code is

            TLMutatorV26.TLMutator

            and yes you need a ini file it is to be in the system folder
            I ahd a problem with it generating by itself as well i had to manually create it



            Name it

            Translocators.ini

            and the following is my ini config you can alter as you wish



            [TLMutatorV26.OldTransBeacon]
            bImpactSound=True
            bOldAmbientSound=True
            VeloType=1

            [TLMutatorV26.TLMutator]
            TLNum=0
            bHitWallSound[0]=0
            bHitWallSound[1]=1
            bHitWallSound[2]=0
            TranslocatorName[0]=UT2003 Translocator
            TranslocatorName[1]=UT Translocator
            TranslocatorName[2]=UT Classic Translocator
            bTrail[0]=1
            bTrail[1]=0
            bTrail[2]=1
            bTranslocationSnd[0]=1
            bTranslocationSnd[1]=1
            bTranslocationSnd[2]=1
            bOldTLSnd[0]=0
            bOldTLSnd[1]=1
            bOldTLSnd[2]=0
            bOldTranslocationSnd[0]=0
            bOldTranslocationSnd[1]=1
            bOldTranslocationSnd[2]=0
            bOldModuleSnd[0]=0
            bOldModuleSnd[1]=1
            bOldModuleSnd[2]=0
            Speed[0]=1200.000000
            Speed[1]=980.000000
            Speed[2]=1200.000000
            FireRate[0]=0.250000
            FireRate[1]=0.650000
            FireRate[2]=0.250000
            AmmoChargeMax[0]=2.000000
            AmmoChargeMax[1]=1.000000
            AmmoChargeMax[2]=6.000000
            AmmoChargeRate[0]=10.000000
            AmmoChargeRate[1]=10.000000
            AmmoChargeRate[2]=0.400000
            ProjSpawnOffset[0]=(X=25.000000,Y=8.000000,Z=-10.000000)
            ProjSpawnOffset[1]=(X=25.000000,Y=8.000000,Z=-7.000000)
            ProjSpawnOffset[2]=(X=25.000000,Y=8.000000,Z=-10.000000)
            bShowChargingBar[0]=1
            bShowChargingBar[1]=0
            bShowChargingBar[2]=1
            bBotsCanUseIt=True
            bAnnounceFrags=True
            bAllowTransFix=False
            VeloType[0]=0
            VeloType[1]=1
            VeloType[2]=2
            bShameUnlocked=False

            [TLMutatorV26.NewTransBeacon]
            bImpactSound=False
            bOldAmbientSound=False
            VeloType=0

            Comment


              #7
              when i put in the ini config that you have and i start my server up it erases everything in the trans ini file except for this:

              [TLMutatorV26.OldTransBeacon]
              bImpactSound=True
              bOldAmbientSound=True
              VeloType=1

              i did it over and over and it kept doin it...

              and i am using the exact command line as you and i also added it to my server ini file in the serverpackages=TLMutatorV26...i think thats right.....well i dunno man...i dont' like that big fat orange trans..i want to change it but it won't let me for some reason....

              Comment


                #8
                you must have some other tranloscator mutuator over writing your values

                sorry only thing i can think of

                Comment


                  #9
                  do i have to erase the original translocator or something?? i don't have any other translocators...this is the first trans i have tried to install??

                  Comment


                    #10
                    hey you got everthing in order other tl mutators and the original will not conflict with this mod it may have something to do with the unreliable copy and paste here is the config I use I all my servers Tl mutator .ini also try to make the change with the server completely off. the overwrite may be occuring while server is still up and running if you have no way of turning it off change it while its in reboot

                    Comment


                      #11
                      I have the same problems with the TLMutator v2.6. I am running the following mods on my server:

                      Anti TCC 1.09
                      MapVote 4.00 b9
                      LowGrav
                      QuadJump
                      VSK Enhanced Zoom Shock Rifle
                      {VAS}-SaveToServer (from Vas collection v1.04)

                      I can activate the TLMutator mod but I can only get the standard UT99 xloc configuration. I have modified the translocator.ini file in several ways but it always comes back to the original settings.

                      Any ideas?

                      Comment


                        #12
                        Sorry, I guess I should have read ALL of the advise before posting. I originally had an translocators.ini file very similar to the one in Nihlist's post. However, I downloaded ******'s .ini and saw that he set speeds 1, 2, and 3 all to 2500. That did work for me. It is not the way it is supposed to work but it does. I was able to go through and set all 3 TL's to the have the same settings (the ones I wanted as my UT2003 settings) to get it to work. I guess my "TLNum=0" line didn't mean a whole lot.

                        Thanks ****** (BTW, thank you for all of the great DM maps, have almost all of them loaded on my DM server)!

                        Comment


                          #13
                          d gator im guessing it is because im the vsk shock rifle mutator automatically picks a transolcator you will see that when you save the translocator ini file and the run your server and go look at it the tranlocator ini file after your server has run and the number for translocator probably changes


                          hope you follow that

                          Comment


                            #14
                            translocator still dont' work for me......it keeps writing over my settings and taking my trans ini to the first trans in the list

                            [TLMutatorV26.OldTransBeacon]
                            bImpactSound=True
                            bOldAmbientSound=True
                            VeloType=1

                            and the speed of the dam thing goes to 980 which is default i believe but i hate this trans its a pain in the ***..i took all the speeds to 2500 like u did and it didnt' work.....does anyone here use the beamMeUpScotty trans....i have the files for the trans i jus dont know wat to put in my command line to use it...neone know wat to put in the commandline for the beam me up scotty trans??? thanx in advance

                            Comment


                              #15
                              some mutator is defaulting your tl type to a number 0, 1 or 2 try changin all the settings in the ini to be what you want no matter what translocator is chosen whether it be 0,1 or 2 !!


                              so for instance

                              [TLMutatorV26.TLMutator]
                              TLNum=0
                              bHitWallSound[0]=0
                              bHitWallSound[1]=0
                              bHitWallSound[2]=0
                              TranslocatorName[0]=UT2003 Translocator
                              TranslocatorName[1]=UT2003 Translocator
                              TranslocatorName[2]=UT2003 Translocator
                              bTrail[0]=1
                              bTrail[1]=1
                              bTrail[2]=1
                              bTranslocationSnd[0]=1
                              bTranslocationSnd[1]=1
                              bTranslocationSnd[2]=1
                              bOldTLSnd[0]=1
                              bOldTLSnd[1]=1
                              bOldTLSnd[2]=1

                              the number in the brackets prior to the equal sign is the "number" which the tl is currently using..so if you put them all the same it will in theory have only one group of settings to run at


                              notice each setting is the same no matter what tl number

                              Comment

                              Working...
                              X