I regret that I must make my first post a support one, but this is my problem:
Attempting to run UDK.exe in any way (double-click, commandline, frontend...) does not work. I do not even get a splash screen or anything. Nothing appears to happen, but a Launch.log is generated.
Unforunately, the log doesn't tell me anything that is remotely useful: if my specs weren't up to it, it'd complain about that.
My OS is Windows XP SP3 (32-bit), and my specs are as follows:
This is the unhelpful log in question:-General-
BIOS: Award Modular BIOS v6.0
Processor: AMD Athlon(TM) XP 2500+, MMX, 3DNow, ~1.8GHz
Memory: 1536MB RAM
Page File: 739MB used, 2184MB available
Card name: NVIDIA GeForce 7800 GS
Chip type: GeForce 7900 GS
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_00F5&SUBSYS_A5063842&REV_A2
Display Memory: 256.0 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
NOTE: This log is when I attempted to run Whizzle - the log is just about identical no matter what I'm running in the UDK...
As you can see, it doesn't tell me what the critical error is, at all.Log: Log file open, 11/07/09 13:10:55
Init: Version: 5860
Init: Epic Internal: 0
Init: Compiled (32-bit): Oct 30 2009 13:20:02
Init: Changelist: 390428
Init: Command line: -DEFENGINEINI=..\..\UTGame\Config\DefaultEngineUDK. ini
Init: Base directory: X:\Unreal Development Kit\Whizzle\Binaries\Win32\
Init: Character set: Unicode
Init: Computer: MAINPC
Init: User: Jordan
Init: CPU Page size=4096, Processors=1
Init: High frequency timer resolution =3.579545 MHz
Init: Memory total: Physical=1.5GB Pagefile=2.9GB Virtual=2.0GB
Init: WinSock: version 1.1 (2.2), MaxSocks=32767, MaxUdp=65467
Init: WinSock: I am MainPC (192.168.1.64:0)
Init: Presizing for 83221 objects not considered by GC, pre-allocating 0 bytes.
Init: Object subsystem initialized
Log: Last hardware survey: Ver=5860, Date=20091106. Uploading again.
Log: === Critical error: ===
Address = 0x2e5e6ea (filename not found)
Address = 0x2e5146d (filename not found)
Address = 0x2e537c9 (filename not found)
Exit: Executing UObject::StaticShutdownAfterError
Log: Log file closed, 11/07/09 13:10:59
P.S: I have tried rebooting and reinstalling the U3 Redistributable...