ummie4
02-24-2012, 05:19 PM
Design:
http://farm5.staticflickr.com/4099/4852955215_a50749122b.jpg
Cut:
http://farm5.staticflickr.com/4138/4888267394_f37b68263d.jpg
Raw product:
http://farm5.staticflickr.com/4115/4887664511_20babd1c9e.jpg
Polish:
http://farm5.staticflickr.com/4117/4891053125_3d6e48cbb3.jpg
http://farm5.staticflickr.com/4115/4896666596_d693f64f89.jpg
Paint:
http://farm5.staticflickr.com/4142/4905500599_c4e2acc5c9.jpg
I gave 2 away to fellow team mates to thank them for paying for our website and server. And for their contribution to the community by creating and hosting custom UT3 content. 1 could be on its way to Flak if I can get a beta UT4 slot. And 1 I am keeping for myself. No I don't think I can make more for the purpose of selling them, as it is a registered trade mark. They are too expensive to make to just hand them out to anyone. They were cut from 1/2" thick 6061 aluminum, that ran me about $12 for the material. The initial fee to get the first one cut on the water jet machine was $85. The next 3 medallions ran about $12 a piece to cut. I got a good deal on this because a friend of mine writes the programs for the water jet machine at his company. I would bet that no one would even consider turning on a $500K water jet machine for a mere $125...
Hope you all enjoy!
http://farm5.staticflickr.com/4099/4852955215_a50749122b.jpg
Cut:
http://farm5.staticflickr.com/4138/4888267394_f37b68263d.jpg
Raw product:
http://farm5.staticflickr.com/4115/4887664511_20babd1c9e.jpg
Polish:
http://farm5.staticflickr.com/4117/4891053125_3d6e48cbb3.jpg
http://farm5.staticflickr.com/4115/4896666596_d693f64f89.jpg
Paint:
http://farm5.staticflickr.com/4142/4905500599_c4e2acc5c9.jpg
I gave 2 away to fellow team mates to thank them for paying for our website and server. And for their contribution to the community by creating and hosting custom UT3 content. 1 could be on its way to Flak if I can get a beta UT4 slot. And 1 I am keeping for myself. No I don't think I can make more for the purpose of selling them, as it is a registered trade mark. They are too expensive to make to just hand them out to anyone. They were cut from 1/2" thick 6061 aluminum, that ran me about $12 for the material. The initial fee to get the first one cut on the water jet machine was $85. The next 3 medallions ran about $12 a piece to cut. I got a good deal on this because a friend of mine writes the programs for the water jet machine at his company. I would bet that no one would even consider turning on a $500K water jet machine for a mere $125...
Hope you all enjoy!