UDK Video Tutorials(Youtube)

[Raven67854]

Hey guys I downloaded the UDK the other day figured some stuff out so I decided to make a few tutorials on some of the stuff I have learned. So please letme know if you guys have any other suggestions for tutorials. I currently have a few more I am making.

Getting Started with UDK:
http://www.youtube.com/watch?v=OcJ3J2Yf_Wg Part 1
http://www.youtube.com/watch?v=sF8IGc_SRBI Part 2

Unreal Terrain Basics:
http://www.youtube.com/watch?v=VYGG2e9CEBE

Fracture Tutorial:
http://www.youtube.com/watch?v=WLaxPKCeLaY

Fluid Surface Actor Tutorial:
http://www.youtube.com/watch?v=4-qEHHorBAs

Cloth Basics with UDK
http://www.youtube.com/watch?v=fwXsHvlVryE Part 1
http://www.youtube.com/watch?v=V5iVXo-uIAs Part 2
http://www.youtube.com/watch?v=P-DDsxLaEiE Part 3

CrowdSystem Tutorial:
http://www.youtube.com/watch?v=GTP4TDBGWsQ

SpeedTree to UDK Basics:
http://www.youtube.com/watch?v=bG79EosNiBQ Part 1
http://www.youtube.com/watch?v=hnU1qK044xw Part 2
http://www.youtube.com/watch?v=mqchkGvlsKk Part 3
http://www.youtube.com/watch?v=jp6sUJfIfaU Part 4

Exporting Static Mesh's From 3ds Max to UDK:
http://www.youtube.com/watch?v=Aw5sjBFvCKM

Geometry Mode Basics:
http://www.youtube.com/watch?v=anpHOKKUzqw

Ladders and Jump Pads:
http://www.youtube.com/watch?v=hhytuNKwQnY

Introduction to Matinee:
http://www.youtube.com/watch?v=NGd4wDWjRNY Part 1
http://www.youtube.com/watch?v=O9S83hHsizg Part 2
http://www.youtube.com/watch?v=5tfCDiUS7vM Part 3

Exporting Static Mesh's From Blender to Unreal Development Kit:
http://www.youtube.com/watch?v=c0yUuBE9M-o

Swimming in the Unreal Development Kit
http://www.youtube.com/watch?v=iryqyaziFgE

Physx Destructables:
http://www.youtube.com/watch?v=qEZsgTxfWv4

Introduction to Unreal Kismet:
http://www.youtube.com/watch?v=OuE1xOCqtAw

Teleporters:
http://www.youtube.com/watch?v=1AjI7C-G4hM

Streaming Levels in the UDK:
http://www.youtube.com/watch?v=ROkHmMEWHU8

ProcBuilding:
http://www.youtube.com/watch?v=nkloINgGSgM

Godrays/Light Shafts Tutorial using Directional Lighting:
http://www.youtube.com/watch?v=CrUrUbfJBhc

Godrays/Light Shafts Tutorial using Point Lights:
http://www.youtube.com/watch?v=scYtxM_kQ-Y

Upcoming tutorial:
Creating an RPG in the UDK From Start to Finish.
Materials
Kismet
Lighting
Soft Body Physics

*NOTE*
Guys please check the description and read the prerequisites. I have posted links to my other video's that you should all do first.

[Xero]

Ohoooo 0.o
You are so cool. Thank you.

[Raven67854]

Your welcome and thanks glad you like them :).

[Zomy]

Thanks a lot!
If you could make a tutorial on how to import assests would be asome!
Thanks again.

[Raven67854]

@Zomy
Sure I will make one and post it in a few hours. I am heading off to bed :).

[wat2k]

Raven67854 thanks very much. They 're very helpful tutorials. good night. :)

[com.freak]

Dude......hw can I say thanx :)
the tutorialz are simply amazing...
Could u plz make a tutorial how to make custom character animation (Body+facial) in 3ds max or other animation program???
I'm using UDK for machinima..so I need this tutorial.
Tx in advance.............
keep it up..we want more from you :)

:)

[Raven67854]

@wat2k
Your welcome and good night :).

@com.freak
I might making an entire tutorial on animation a character with body and facial animations. Would be a fairly large tutorial. Try googling for some. I will show how to import into the UDK but not sure I am gonna do a fully blown tutorial like that.

[com.freak]

@com.freak
I might making an entire tutorial on animation a character with body and facial animations. Would be a fairly large tutorial. Try googling for some. I will show how to import into the UDK but not sure I am gonna do a fully blown tutorial like that.

If I try to apply some mocap animation...its gonna work??? I hav lots of mocap files...

[steph]

Useful tutorials thank you!

[saymoo]

Raven67854,

Amazing work, highly appreciated!:D

One question though, maybe you could also do some about kismet, cascade, phat, ui editor, facefx, actorx, and common things, not yet covered. It hasn't to be all very indepth, but global basics, with working example, like you did now.

Anyway, THANKS for your work on these tutorials. Love to see more very soon.

To others: if you have some tutorials, like these ones, or the same but from another perspective, or with other samples, please DO provide them, to the community. The more movies, the better.:)

[yoni92]

Wow!!!
Great tutorials! If u can, please make a tutorial about friction!

Thx!!

[Saishy]

Thanks for the tutos.
Would you please add those youtube subtitles?
I'm having problems with the sound D:

[yahadi]

Hi,

Great job on the tutorials, they are concise and to the point.

I really like to second the request for character importing from 3DS Max along with animations for the body and use of FaceFX to create a simple cutscene.

[Raven67854]

Good morning guys :). Well guys if somebody can provide me with the animations or the animated model. I can show you all how to use FaceFx. I haven't used it yet but I will sit down and learn it till I do then make a video on how to use it. The SpeedTree video's will be going up in a few hours as well guys. Thanks again glad you guys like my videos :).

[jacoo]

Thanks a lot :D

[Froyok]

Thank you for the tutorials

About the fracture tutorial, how to change the default texture ? When you break the wall, we can see this texture, it's possible to change this ? It's when you create the fracture wall ?

[Frood]

Thanks a lot Raven for these tutorials, they are very much appreciated!

[InCharacter]

Linked to BeyondUnreal Wiki.

[Gizmosan]

very good tutorials! you talk sooooo softly :)

what did you use to capture them? I wanted to make some Unreal Cascade tutorials.

[Piranhi]

Good tutorials mate, keep it up

[sommergemuese]

Thank you very much

[kimphoe]

Theese tutorials were really good and useful. You explained it good, made them really easy to follow and got me sitting with an awesome result made by myself. I don't know how i can thank you!

Could you do a tutorial on how to do a surrounding sky?

[mixedmeters]

Great Job keep it up :)

[WOBBLER]

Thanks, very easy to follow ,hope you post more.

[WildWestGames]

GREAT WORK! KEEP IT COMING!! RAAArRrr. hehe


Hey guys I downloaded the UDK the other day figured some stuff out so I decided to make a few tutorials on some of the stuff I have learned. So please letme know if you guys have any other suggestions for tutorials. I currently have a few more I am making.

Getting Started with UDK:
http://www.youtube.com/watch?v=OcJ3J2Yf_Wg

Unreal Terrain Basics:
http://www.youtube.com/watch?v=VYGG2e9CEBE

Fracture Tutorial:
http://www.youtube.com/watch?v=WLaxPKCeLaY

Fluid Surface Actor Tutorial:
http://www.youtube.com/watch?v=4-qEHHorBAs

Cloth Basics with UDK: part 1 and 2
http://www.youtube.com/watch?v=fwXsHvlVryE
http://www.youtube.com/watch?v=V5iVXo-uIAs

CrowdSystem Tutorial:
http://www.youtube.com/watch?v=GTP4TDBGWsQ

Upcoming tutorials:
Using Speedtree and importing into UDK
Creating materials with Mat Editor
Using Soft Body's in the UDK

[roychr]

Hi,

I would be forever on my knees if you could show how to import a model that is disasembled for customisation (multiple heads, legs and torso) and animate it with the animation tree for example.

[Raven67854]

Alright guys I added the SpeedTree tutorials today. Also glad you guys like them :). I will be abit busy this weekend so expect only 1 or 2 tutorials a day. I am working on a tutorial on Intro to unreal script hope to have that up by Sunday. Once again thanks guys glad you like my tutorials.

@roychr
Hahaha well send me a completed model. I Haven't done to much with the animation tree. But I can't animate so :). If I had a simple test model to try out then I might be able to do it.

@Everybody
Glad you like my tutorials and sorry if I didn't answer of your questions. I am gonna head off to bed night guys.

[kvsani]

Thanks Alot

Its a great effort

Thanks Again.......

[sriharshagurram]

Hi Raven

Thanks alot for these tutorials.....

[wat2k]

Wow Raven.
1-2 tutorials a day is very great. Thank you very much.

[Visceral89]

Really awsome tutorials, i commented on your videos over at youtube but i figured i had to get you cred over here to. Really great, i was thinking of doing a series myself but i havent figured out much of the new engine yet.


EDIT: what i meant was, there is like 9001 fracture tool tutorials out and no tutorials seem useful when you have the documentation.

[dr3k]

Maybe if you know how to setup a flashlight i'll be very pleased if you can create a tutorial for that, thanks!

[ShawnBaxe]

Hey Raven,
thanks for sharing your knowledge :) Great tutorials - solid and easy to follow. Keep 'em comin' :D

[fallingbrickwork]

Really great set of tutorials, I enjoyed watching all of them and they gave me new insight.

Keep up the great work and please post some more.

Regards,
Matt.

[RJM74]

Very useful tutorials, thankyou.

[katana2665]

yep, your stuff is the best. I also would like to know what you're using to record your stuff...it's very clean.

[Moose_Head!]

Bravo! I can see these will be of great use to me.

Thank you.

[Ferkhat]

keep up the good work raven. great tutorials of udk are borning!

[RJM74]

I expect he is probably using something like CamStudio which you can download from the camstudio website.

http://camstudio.org/

[wildicv]

From most of the tutorials i notice everyone is using camtasia. I myself use camtasia.

[RJM74]

I hope you do not mind but I set up a YouTube page named UDKBase.

I was looking for tutorial videos and there seemed to be so many on YouTube.

I decided it would be a good idea to combine the ones I found most useful and informative into one page. Not only so I could easily refer to them myself but for others who go on there for the same thing.

I actually added your videos Raven before I noticed this thread and the post I made previous. I also added ones by kcin228 and 104sargeisms. All the tutorials have been put into their own playlists, ie ones based on terrain are in the terrains playlist etc.

I have subscribed to all owners channels of the tutorials. I have also left a commment that the owners pages can be linked to via the subscribers panel which I located just below the video listings.

[wildicv]

RJM74 Once i split my tutorial up into 10 minute half's and upload them ill pm you the links to add to the channel.

[RJM74]

Ok thankyou. Look forward to adding them to the page.

[bigcess]

good job. thanks.

[anomandarius]

any chance you could link the udkbase channel? for some reason my google-fu is failing me.

[RJM74]

The link to it is here..

http://www.youtube.com/user/UDKBase


For some reason YouTube would not list it in the search bar even though the tags have been entered, will upload a random video of some of my music which should make it findable via the search bar.

[Nerdy3.14159265]

Raven, I've done everything in your crowd tutorial but for some reason they aren't showing up.

[anomandarius]

The link to it is here..

http://www.youtube.com/user/UDKBase


For some reason YouTube would not list it in the search bar even though the tags have been entered, will upload a random video of some of my music which should make it findable via the search bar.

Thank you, that's a great start.

[RJM74]

Your welcome.

It is good to see that the page is being used by quite a few people already. I had spent the previous five days looking up on guides and tutorials for UDK and UE3 engine that I figured it would be a nice idea.


Have uploaded a piece of my music so the channel will now list in the YouTube search engine, just type in UDKBase and then click on the name link to the side of the video although you can reach the page via the video which has a link to the page using the annotations editor.

[MikeNoy]

Yeah, thank you for tutorials, you are awesome Raven !

[Raven67854]

Hey guys sorry for the delay. I have been pretty busy. I have added 4 new tutorials today. One shows how to add weapons, vehicles and a skybox. Another shows how to use ladders and jump pads. Another one shows how to make static mesh's with 3ds Max and import them into the UDK. And last but not least a tutorial showing the basics of geometry mode. Hope you guys enjoy my new tutorials. Also please send me a private message if you guys have any tutorial idea's. I am starting to run out sadly. Only thing I can think of is an asteriod clone tutorial I am working on.

[Lost Haven]

Thanks for the videos , this helps a lot of people with getting started in unreal . It seems you roll out the videos pretty fast .

[Geti]

these were pretty damn helpful, thanks dude.
as said before, some animation tutorials would be awesome, not to mention a decent cascade walkthrough. I've been playing around with it recently but i cant figure out how to get moving emitters happening, for explosion "debris" trails and whatnot.
looking at the new ones now, keep it up whenever you feel inspired :P
edit: just a thought, you might want to have the level set up beforehand for some of the longer tuts, though i noticed you did this for some anyway.

[kosirm]

These are some great tutorials for me (starter in udk), so thank you very much!! Looking forward to see if you make any more. BTW you have pretty good amount of talent for this :)

[wildicv]

RJM74: Theres alot of links so here is my youtube channel link:
http://www.youtube.com/wildicv

[sueds]

nice job ! As always. I may the only one but the sounds is very low on your video, if you could just pop up the volume a little bit it would be awesome.

Cheers

[wildicv]

Yes I know the sound is really low I apologize for this. I do not own a proper microphone so I’m limited to using my laptops built in microphone if I get to close it sounds really bad.

[RJM74]

Ok will add them and put them into their respective types.

Thankyou.

[RJM74]

Added them into their respective channels and they are now showing up on the page.

[sueds]

Yes I know the sound is really low I apologize for this. I do not own a proper microphone so I’m limited to using my laptops built in microphone if I get to close it sounds really bad.

I was referring to raven but I did download your video and they pretty cool and the sounds volume is cool . Nice work too.

[katana2665]

A continued thanks raven.

[steph]

Thanks man!

[sueds]

hi ! Just wondering if someone made the cloth working with maya

[Intermission]

First of all great tutorials, helped me so much so far man :)

I would like to request some tutorials if you don't mind:

1) Making a small house or just like one room with windows, and a door that is openable
2) How to apply textures to BSP brushes (I know basic but hey im new :))
3) Lighting tutorials
4) adding water to a map
5) Kimset
6) Cinematics/Cut scenes

I have so many more ideas but its already great enough that your doing this for the community. Thanks again :)

[sueds]

@ intermission http://hourences.com/book/tutorialsindex.htm

maybe it can help you dealt with basic stuff. There is a lot of basic tutorial if you wish just check the beyound unreal page.

[Noctrine]

The fluidsurface actor tutorial is adding water.

[Raven67854]

Hey guys sorry for not posting anything last night. Kinda got sidetracked watching movies with some friends. I am starting on a quick and simple introduction to matinee. At the end I hope to have maybe a little fight scene going on :D. Also I think I fixed the audio in this tutorial. I know its much much louder than it normally is.

@
Intermission,
1) I think I can wip that up pretty quickly
2)Check out my getting started tutorial
3)Will make one
4)Check out my fluid surface actor. However I need to make another one for water volumes
5)Except a very simple one tomorrow night
6)Working on that series now just uploaded the latest one

@everbody else
Please feel free to pm me if you have any suggestions on how I can improve my tutorials or if you have any questions. Thanks guys hope you all like my tutorials :D

Another update I changed the upcoming tutorials on my thread. Please check the first post on the thread to see all of my tutorials and my upcoming tutorials.

[sueds]

Nice raven looking forward for the unreal script. I just check your first page. Really nice the matinee sequence and the sounds is really much better. Keep the good work. Hope you are doing in the future a grass tutorial.. cheers

[mixedmeters]

Im looking forward to the asteroid game.

[insomnia3d]

thank you for tutorials

[Steelfalcon001]

So far, these videos have been very usefull. Thanks again!

[Babinski]

Thanks for all your tutorials (I don't have time to watch each of them), they are very helpfull for the beginer as I'm.

Don't stop and GO ON...:)

[Raven67854]

Well guys I have a new update today. I added part 2 and 3 of the matinee tutorials. I also concluded my SpeedTree tutorial with part 3 on how to add collisions to your SpeedTree model. As well I added a Blender to UDK tutorial.

Check the first page guys for links to the new tutorials.

@everybody
Thanks for the support and look for more tutorials to come :D.

[sueds]

This is just so nice of you. I think you should create a blog. just to store them in the same place.

[Raven67854]

@sueds
I have thought about it. Might do that one day when I get the chance.

[mixedmeters]

Wow 17 vids to this day. From all of us at the UDK forums thankyou. :D

[sueds]

@ Raven. If you need any help, pm me.

[GuyTina]

Hello World

These videos are very well

Thank you very much.

Bravo

Best regards

[Socrates]

Yo, I can import models etc. pretty well, but the things I was trying to do with my models were like making my map mostly entirely out of them...
however, from what I can tell I can only add very basic collision to models, so if I have a complex model the collision will not work correctly, so I ended up doing some time-consuming calculations and making my map with brushes....
I myself was considering helping you out with some tutorials, but on a more basic level, I noticed many of the comments on your youtube page were on topics I understood myself, and there are a few people in my CAD class at school that always ask me questions, whether I know or not, or how many times they ask the same question...within five minutes...
anyways, I might get camtasia and make a few basic tutorials, such as the water volumes to the fluid surface, not what I would expect you to put in a tutorial, however I'm not sure how to get a blurry effect whilst underwater, I noticed one of the example maps had this, is it another volume I'm missing?
(btw; to swim around in your "water" after adding fluid surface actor, resize your brush to take up the space that you want your water, then go to the brush dropdown from the top, select add volume, and select water volume.)
anyways, cheers, good job, I hope all of us congratulating you and thanking you will continue to motivate you to teach more.

[Intermission]

I hope I am not asking too much, but can you do a very in depth tutorial on bsp brushes and building a level with them (Small level of course) :)

[Socrates]

crap..I actually just made a level with bsp brushes that I am quite happy with, I could have recorded myself making it...
I'm sure it's been done but I re-made Blockfort from mariokart 64, took a model from a Halo CE custom map, and then got my scales and values from it in 3ds max. then used the brushes etc. to create my map.
I'm not sure if I myself could do an in-depth tutorial as I'm still learning new things everyday about the brushes, for instance the CSG intersect and dis-intersect buttons I'm not sure what they do, haven't used them yet...

[AinigmA]

Socrates,

If you make a PostProcessVolume. You can change the blurriness with the DOF variables found in the properties.

[Raven67854]

Alright guys a real quick update. While I have made other tutorials I only have enough time to upload one. So I uploaded the tutorial on how to swim in the UDK. Go on ahead and check the front page. Also go on ahead and sign up at my forums if you guys wanna talk outside of here. I have included a link in each of my video descriptions where I setup my forums. Thanks guys and see you guys tomorrow.

[Nerdy3.14159265]

How do you make it so that when you shoot a destructable wall with a rocket launcher it destroys a chunk of the wall not just a little? Also how to you make it so that the chunks don't have that default texture on them? Again thanks for the tutorials.

[mafiadude1]

Thanx a million for the tutorials. I would be lost without you :)

[Raven67854]

Alright guys just a real quick update I added in part 3 to the cloth series. This part shows you how to make tear-able cloth with weapons. More coming soon :D.

[Nerdy3.14159265]

I'm still having some trouble with the Crowds not walking, getting a proper wall fracture with a rocket launcher and a way to texture the chunks.

[Jade-Phoenix]

Raven? Do you perchance have a Tut on vehicles? I have a Custom Vehicle that we're trying to port over but we're stuck at step 1 the how to part. I know it sounds stupid or dumb, but that's where we're at, at the moment.

[Pleco]

Thanks Raven, very helpful & much appreciated.

[robotbebop]

You mentioned an asteroid game tutorial, does that mean you've already got it finished in some capacity or are you still waiting to start it?

[fallingbrickwork]

These tutorials keep getting better and better... a fantastic contribution to the community.

Best Regards,
Matt.

[Raven67854]

@robotbebop
I am working on the asteroid tutorial :). I almost have all of the assets done. And I just need to make all of the different parts to the tutorial. It's uhm a challenge to make because youtube only allows me 10 minutes so with any luck I will have it up in the next few weeks. HOPEFULLY less :). But I am rather busy this week. I also have to post my Unreal Script tutorials first so you guys have a somewhat understanding of Unreal Script.

@fallingbrickwork
Thanks glad you like them.

[CrazyIwan]

Raven, i have registered here on forum, only to say thank you for your tutorials :)
Like fallingbrickwork said, its fantastic contribution!

oh, and sorry for my bad english :D

[Farlas]

thx for all these useful tutorials

by the way can you make a tutorial on how to make custom collision in 3DS Max to import in UDK ? cuz i try to use the collision auto convex in staticmeshes editor from udk but can't get what i want.

and continue your work lot of ppl will make a game with these tutorials :D

[marcusmattingly]

Raven,

Man, you are awesome! Thanks so much for creating all of these tutorials. They have been incredibly helpful. The best thing is you are always easy to follow and get right to the point.

My requests would be:

1) Anything on UnrealScript.
2) Using Kismet to load a new level based on colliding with a portal or something like that.
3) HUD/Menu/UI related stuff
4) Setting up terrain textures where they apply themselves automatically based on height and angle. I keep reading hints that it can work this way, but haven't figured it out.

Thanks again.

Marcus

[robotbebop]

@robotbebop
I am working on the asteroid tutorial :). I almost have all of the assets done. And I just need to make all of the different parts to the tutorial. It's uhm a challenge to make because youtube only allows me 10 minutes so with any luck I will have it up in the next few weeks. HOPEFULLY less :). But I am rather busy this week. I also have to post my Unreal Script tutorials first so you guys have a somewhat understanding of Unreal Script.

@fallingbrickwork
Thanks glad you like them.

You could always just post the source and then do the tutorial :p I'm actually putting together my own asteroids clone for my own learning purposes; I'm curious as to how you implemented the actual asteroids, was it with custom Pawn/Controllers or using your own Actor subclasses?

[Eraserhead2416]

Hi, your videos are great, some of the few that I can actually follow.
You don't skip anything, or even start the beginner videos with so much as a cube on screen. That helps so much in understanding the workflow, and something that so many tutorial makers just don't seem to get. It's the difference between being able to follow you and learn, or being behind the "instructor" right from the start. So thank you, please continue all your great work.

[HarrisM1432]

Joined up to say thanks for making these videos, it's my first experience with Unreal tech and they have helped me a great deal! I now have a much better understanding of the UDK.

Can't wait for the next tuts! :D

[GamerKnight]

I actual found these tutorials ages ago, but when i noticed this thread of your i thought i would say thanks.

I have been a programmer for years, but never any good at graphics based stuff your tutorials helped me a lot in the first few days, i got so used to how the enviroment work and how to build basics shapes (something i have never done before). i masted them all in 2days without sleep hahah

[Raven67854]

Hey guys sorry for the lack of tutorials here lately. Took a week off to just kind of relax and to work on the asteroids tutorial. So you guy's should be seeing some kind of a tutorial from me everyday again or a few weeks before I end up taking another break to not get burnt out.

@GamerKnight
Thanks glad you like my tutorials and glad they helped.

@marcusmattingly
I have a few of the things you asked for coming up soon.

Physx Destructables
http://www.youtube.com/watch?v=qEZsgTxfWv4

[unrealdeveloper]

Raven67854, I cannot express how awesome this thread is so instead I'll just ask: how did you become so damn knowledgeable about UE3 development?

[Raven67854]

@unrealdeveloper
I read the UDN Documentation. And a hours upon hours of trial and error.

[riowahab]

Hello I'm a newbie in UDK,,
I want to request a tutorial showing how to edit the first time that we start the application.

I want to use my own model as the start,not the gun from Unreal Tournament.

Thank you so much, you tutorial rocks!

[Juanchocs]

ooooh your tutorials are really great!!! it helped a lot thanks Raven

waiting for the next tutorial ^^

[nosleep]

nice vids but could you 'normalize' your video volume level? some of your videos are really loud while others are really quiet.

[geodav]

seems to be a problem with your ladder video

[GRoss]

Thanks a lot for the tutorials!!

[marcusmattingly]

Hey guys sorry for the lack of tutorials here lately. Took a week off to just kind of relax and to work on the asteroids tutorial. So you guy's should be seeing some kind of a tutorial from me everyday again or a few weeks before I end up taking another break to not get burnt out.

@GamerKnight
Thanks glad you like my tutorials and glad they helped.

@marcusmattingly
I have a few of the things you asked for coming up soon.

Physx Destructables
http://www.youtube.com/watch?v=qEZsgTxfWv4

Awesome, thanks so much!

[bigsnake]

COOL ! Thx alot Raven, you may wanna raise your voice volume though cause I had to turn my speakers up rly loud to hear a thing :(

[xXShimmyXx]

Raven your my hero!
do you know if there is a way to insert items from Gears of War PC?
i have it installed on my computer i just wana know if i can open those objects in UDK
because UDK is much better than the one they sent with GoW PC

-thanks

[strider2023]

Raven67854...thanx a lot mate...i am looking froward to make a small game in it...ur tutorial helped a lot to start it...looking forward to see more of such helpful tutorials!!!

[GuyTina]

Good morning everybody:)

Would Be it possible of faires of the files PDF instead of videos? :o

It is much more practical. :)

Thanks a lot:)

[sueds]

Good morning everybody:)

Would Be it possible of faires of the files PDF instead of videos? :o

It is much more practical. :)

Thanks a lot:)

Don't see how ..

Anyway ! Raven how is your unreal script tutorial going on ? Do you have any info on what area it will cover ? Looking forward to have news from you.

cheers

[Raven67854]

Hey guys,

Thought I would give an update since I have been so silent on here as well as youtube. I scratched the Asteroids tutorial as I wasn't having that much fun making it. And instead I am now working on a RPG using the UDK. The tutorial is coming along well so far. I have no ETA on when it will be completed. However now that the holidays are over with. I am going to start posting more smaller tutorials again while I work on the big one.

-Raven

[QuasarTD]

That sounds great thanks very much.

[xXShimmyXx]

Nice man dieing you see mroe of your tutorials

[polix]

Hello Raven, Thank you for all your hard work and effort you have put into the community. Would it be possible to get a tut on how to build like a very simple house
with a floor, 2 peice roof, 4 walls, and get it imported and be able to PICK the wall peice
2 and apply the MAT pick roof peice 1 and apply a mat?
We need to be able to import our buildings and apply our mats to them easily and still
have not figured out how.
We are using Softimage 2010 and exporting as ASE. Any help to this we would be
really greatfull.

[†-[Yylith]-†]

Hi, I want to say congratulations to Raven for his good tutorial ^ ^. But I have a problem:( :
When I modeled my field, so when I took the brush and the tool, and when
I support my field to model nothing happens I try to support with the right clik and the wheel but nothing. :confused:

Thank you for helping me goodbye

[Raven67854]

Hey guys I have added 2 new UDK tutorials tonight. Will add a few more tomorrow night as well :). Also once again sorry for not doing much in December was just busy. So the 2 new tutorials for tonight are both on teleporters and an introduction to unreal kismet.

Teleporters
http://www.youtube.com/watch?v=OuE1xOCqtAw

Unreal Kismet Part 1
http://www.youtube.com/watch?v=1AjI7C-G4hM

[xXShimmyXx]

Yeah! nice

[polix]

Raven think you might beable to create a in-depth video for speetree?
One that shows the basics or picks up were your other one leaves off and conts
on into more adv topics and features? Like painting Forests, other plants and GRASS
How to take adv of their LIB and maybe paint more than 1 type of tree????
Thank you for all your hard work it has been outstanding...

[robin1232]

wow, in the ladders and jumppads tutorial you speak so softly I can't understand you even with my volume maxed out

[Raven67854]

Hey guys decided I should give a quick update. I have decided that I want be doing anymore single UDK tutorials for awhile. Instead I will be focusing on my RPG tutorial which I am still writing out and gathering assets for. The RPG will cover most of what I can do in a single tutorial and will have more of a focus and direction.

Thanks,

Raven

[GamerKnight]

thanks again raven, been watching your tutorials since the first month UDK was released,

really helped me get to grips with it, keep up the good work.

nice and easy to follow tutorials here guys and girls

[Nerdy3.14159265]

So this RPG tutorial will include a lot of stuff like a tutorial on how to put weapons in game from start to end.

[Raven67854]

So this RPG tutorial will include a lot of stuff like a tutorial on how to put weapons in game from start to end.

Yep it will be a complete game.

[polix]

Thank you Sabath I will give that a try, we found some way simular but not
the way you are speakign of.


St.Sabath;27097760']Before export,apply different MatID's in SoftImage(like : Roof Mat ID 1,Wall 1 Mat Id 2 etc etc,different ID's for as many different different materials you want to use)
Export as ASE as usual,and if you double click your Static Mesh in the contentbrowser,
youll see those Mat ID in the properties,assign Materials according to your likings... :cool:

[Nerdy3.14159265]

Yep it will be a complete game.

Sounds awesome! How long do you think it will take until it's finished?

[Raven67854]

Sounds awesome! How long do you think it will take until it's finished?

May take awhile I am writing out all of what is required. I am also trying to get some art assets by either finding them or begging from friends. But I have no ETA as of yet.

[xXShimmyXx]

oh damn cant wait for the RPG tut :D

[Thewiruz]

RPG whats that?Will it contain any modular design?
Thanks!

[xXShimmyXx]

RPG= Role Playing Game
i beleive like WoW-ish

[Raven67854]

Yes RPG == Role Playing Game. However this game will be focusing on single player and maybe most likely not but maybe some multiplayer aspects. However I do not plan to show people how to make an MMO in the UDK.

[Zerav]

Will you cover level changing and when you return to first level you spawn at the point you exited? or if there is other ways into the level load at the location you set?
Hope you understand this.

O = Start of Game or Start of map from world map transition.
T = Exit and Entrance
| && - = Level Links

xxxx xxxx
OxxT - Txxx
xxTx xxTx
| |
xxTx xxTx
xxxT - Txxx
xxxx xxxx

[joeharner]

Some tutorials on how to swap out the default content would be nice, like the weapons, perhaps? These tutorials seem to cover world creation fairly well, but it would be nice to see how to make simple, custom weapons, like a pistol, replace the built-in link-gun.

[Nerdy3.14159265]

I think it would be awesome to include a portal gun into the tutorial and maybe, a way to change your view like in metroid prime with visor changes.

[skipgamer]

Your kismet and teleporter tutorial links are back to front just so you know.

[Amir Hossein]

Thanks Raven . I'm Waiting For Your Tutorials.

[DaemonXR]

I dont know how i missed this thread from start. Holly cow, u r awesome Raven. I need to say thanx m8. In speed tree tutorial when u imported everything to UDK u forgot to set compression method for normal map to TC_Normalmap. Maybe because of this u had your leaves darker in start. For me it works like a charm. I didnt catch u about lights quite wright. In my "lightning build options"
i am using lightmass. It works without problems. Also "direct light map" checkbox is checked under light properties. I dont know why it does not work with you. Anyway awesome tutorials. Keep it up.

[Raven67854]

@DaemonXR
The lightmass problem is fixed. So in the newer builds you can without any problem. However when those tutorials were made UDK used to crash.

[DaemonXR]

@DaemonXR
The lightmass problem is fixed. So in the newer builds you can without any problem. However when those tutorials were made UDK used to crash.

Yeah sorry, sometimes i do not check dates of the posts i am watching :D
I was startled by the numbers of tutorials you made on the first:eek:
Is there any info about your huge tutorial u r preparing?
And oh i have some tiny problem with my speedtree navigation in my january build i installed. My mouse navigation in speedtree modeler view port is sometimes locked. Mouse pan and rotate with left and middle button does not work and occasionally it start to work. Did any of you experienced same problem?
Also UDK on first run block when try to build my lightning. After app reset it work fine to the rest of the day. Is this some tiny memory issue?
Cheers

[Raven67854]

@DaemonXR

I am not sure whats up with your build of SpeedTree. Try updating to the latest version and see if that fixes it. I have never come across that problem.

By the way guys I have uploaded two tiny new tutorials. One showing you how to use the SpeedTree hand drawn feature and another on the basics to level streaming. These are in preparation for the upcoming rpg tutorial ;).

Speed Tree Part 4 Hand Drawing
http://www.youtube.com/watch?v=jp6sUJfIfaU
Streaming Levels in the UDK
http://www.youtube.com/watch?v=ROkHmMEWHU8

[DaemonXR]

@DaemonXR

I am not sure whats up with your build of SpeedTree. Try updating to the latest version and see if that fixes it.

February buld installed and speedtree issue fixed. :D
Raven, any chances for terrain plus speedtree tutorials. I am also interested for custom speedgrass creation and aplying same on freshly created terrain?
Keep up m8....

[Raven67854]

@DaemonXR
Well just create your tree and terrain and place it. I can make a tutorial later on how to do this although it should be pretty straight forward. As for custom grass I will make a tutorial on how to do that later. Although I believe with speed tree I can only make shrubs.

[sranissen]

@raven

I just wanted to say thank you so much for posting all these great vids. They have really help speed things along for me. I am really looking forword to the rpg vids due to the fact that is the style I am going for in my school portfolio project. If you wouldn't mind, could you maybe point me to a site that could show me how to set up a few things.

These are the only things a have left to tackle for my project.

Exp system
Custom class system ( healer, tank and so on)

I have looked all over and can't find anything. Maybe I am just using the wrong terms.

Thanks so much
Nissen

[DaemonXR]

@DaemonXR
Well just create your tree and terrain and place it. I can make a tutorial later on how to do this although it should be pretty straight forward. As for custom grass I will make a tutorial on how to do that later. Although I believe with speed tree I can only make shrubs.

I was thinking more like painting trees onto terrain. This is possible in udk, right?
Like applying stencil onto canvas and tweaking size and rotation of stencil. I think i saw that somewhere but than again maybe i mixed something:confused:

[hellslayer]

@raven

I just wanted to say thank you so much for posting all these great vids. They have really help speed things along for me. I am really looking forword to the rpg vids due to the fact that is the style I am going for in my school portfolio project. If you wouldn't mind, could you maybe point me to a site that could show me how to set up a few things.

These are the only things a have left to tackle for my project.

Exp system
Custom class system ( healer, tank and so on)

I have looked all over and can't find anything. Maybe I am just using the wrong terms.

Thanks so much
Nissen
You could grab the Dugeon Defense source code, there you can look at the unrealscript files to find some idears how to get classes into your game.

[Raven67854]

Hey guys I figured out some of the ProcBuilding tool. However I haven't figured it all out yet so if anybody has anything to add please let me know :). So I can update my tutorial.

ProcBuilding:
http://www.youtube.com/watch?v=nkloINgGSgM

[SparkyUK]

Upcoming tutorial:
Creating an RPG in the UDK From Start to Finish.


When will this be live?! cant wait :)

Excellent quality tutorials btw

[Raven67854]

When will this be live?! cant wait :)

Excellent quality tutorials btw

No ETA on it yet. But I am working on it. Found somebody willing to give me some assets so that helps alot :).

[Sudazima]

i would really like a tut about lensflares and skyboxes, almost nothing about them on the interwebs.... :(

[Raven67854]

@Sudazima,

Alrighty I'll see what I can't do about that :).

[Sudazima]

thx in advance, ill be looking out for it ;)

[xXShimmyXx]

Raven man awesome vids!

[Lastoria]

Can't wait for your RPG tutorial. i'm very new to game development but got learning everything i can. ( currently almost have an attatained programming degree) which has helped alot along the way. but i also owe a lot to your videos man! keep them coming

[BoddieBagger]

Raven, your an awesome man for doing these!

[Blue Klayman]

Raven, your an awesome man for doing these!

I agree. And you made the first tutorials right after learning yourself? That is dedication, man.

[Raven67854]

@BoddieBagger, Blue Klayman
Thanks guys :).

@xXShimmyXx
Glad you like them. Hope they were helpful.

[xXShimmyXx]

[QUOTE=Raven67854;27139115
@xXShimmyXx
Glad you like them. Hope they were helpful.[/QUOTE]

they were more than helpful lol
cant wait to see your RPG game

[Blue Klayman]

You forgot the close the quote tags.

[Nerdy3.14159265]

So Raven how are the tutorials coming along?

[Steve Polge]

Do you have a Youtube channel or a page with links that I could link to for the UDN community links page?

[Zerav]

its on the first post in this topic polge : )

[Erratic]

Excellent to see tutorials like this Raven. Will be great for people that want to learn in a different way, compared to just reading documents.

[Raven67854]

Do you have a Youtube channel or a page with links that I could link to for the UDN community links page?

Yes I do my youtube channel is http://www.youtube.com/user/raven67854.

Edit:
Just noticed here you have me added http://udn.epicgames.com/Three/UDKCommunityLinks.html. However instead of saying More YouTube UDK Video Tutorials can it say Raven67854 YouTube UDK Video tutorials instead please?

@nerdy 3.14159265
It's coming along it's the reason I haven't posted any new tutorials in the past 2 weeks :). Trying to get it finished. Will get a video of what I have done so far out to you guys soon as I can.

[Nerdy3.14159265]

Awesome!! You've done a good job so far, so I bet this one will be great too. Can't wait.

[Steve Polge]

Raven, I'll make that change. Please post future requests for changes to the community links page to the sticky thread, as I'll notice them faster there.

[Th3 Duk3]

@raven

you are the man! but I suppose you know that already :)

Good luck with the RPG tut, really looking forward to that one.

[Dvoyles]

Outstanding videos so very. Very useful when I use them hand in hand with the Mastering Unreal Tech book I picked up. Thank you.

[xXShimmyXx]

You Raven are the man!

[HavocInferno]

hey raven,
er...a friend of mine is setting up a tutorial page for UDK...may we could use your tuts (or link them)?
see information here: http://forums.epicgames.com/showthread.php?t=721760
:)

[Raven67854]

hey raven,
er...a friend of mine is setting up a tutorial page for UDK...may we could use your tuts (or link them)?
see information here: http://forums.epicgames.com/showthread.php?t=721760
:)

Sure I don't mind.

[foad_udk]

hi Raven67854
very nice tutorials

[junkens]

your videos were helping me so much to grasp the howl udk thing.
thanks for that and that you allowed us to link yours on our page.

[Raven67854]

your videos were helping me so much to grasp the howl udk thing.
thanks for that and that you allowed us to link yours on our page.

Glad I helped you out :) and that you like my videos.

So guys I know I haven't posted much in these past few weeks. I am still busy and hard at work making the rpg tutorial. As well I am getting ready for exams in 2 weeks :). So anyhow I setup a website where I will be showing off all of my projects but I also invite all of you to come and join if you want. I'm setting up this website to also help answer UDK questions as well as other game development related questions.

http://thumbaxisstudios.com/community/index.php

I know the forum is still really empty and bland, and well crappy. But I hope to have a new theme and everything up shortly. Also the homepage has nothing on it but an HTML page that says test. But all of that will be fixed soon.

Thanks,

Raven

ALSO,

All of my videos are free to be used on any website. Lately I have gotten alot of messages about people wanting to use my videos on there site. I have no problem. However all I ask is that you don't take credit for making the video's. You don't have to credit me just don't embed it and say the tutorial was made by you.

[junkens]

big thanks raven, we marked every video used by you(well not that many for the prerelease but surely we will embed all) with a "Raven" also linked your youtube channel in the basics of udk. When you have a page running should we credit you or the webpage itself?

Anyway if you need help with setting up a decent webpage. I have a big amount of experience with cms(phpbb, joomla, wordpress and so on), webdesign and setting things up that are easy to use or any problems you encounter or something. Just PM me or something I usually can help. :D

[Raven67854]

big thanks raven, we marked every video used by you(well not that many for the prerelease but surely we will embed all) with a "Raven" also linked your youtube channel in the basics of udk. When you have a page running should we credit you or the webpage itself?

Anyway if you need help with setting up a decent webpage. I have a big amount of experience with cms(phpbb, joomla, wordpress and so on), webdesign and setting things up that are easy to use or any problems you encounter or something. Just PM me or something I usually can help. :D

Thanks for the offer but I already have somebody developing the website.

[Dregoloth]

thanks for the tutorials, the quality is top-notch

[deonlewisduke]

AM working on a game for free download called CUBE Beta. Have a question. Am using space volume to float up ladders and across ceiling ladders. Using kismet touch trigger to 2 matinaes of door opening. When door opens space volume disappears and you fall off the ceiling? Please help! This has got me stalled as I can't continue without doors I dont wanna place each one I wanna coppy the whole cube and ALT duplicate it. Anywyas thanks for all the help so far. ALso I posted my udk maps to file pasta and your api forum.
timetellsnolies@hotmail.com

[RavenLoh]

Hi, Raven, you got a thanks from Raven :)

[Zipstacrack]

Cheers Raven, you've helped a lot of people out with these tutorials.

:)

[Raven67854]

Hello everyone,

I've had a pretty long break from making tutorials. School got a tiny bit hellish so I was unable to really do much of anything.

So today the new build came out and I made a quick intro on using godrays. The content blog covered pretty much how to do it however I went on ahead and made one anyways for new people to the UDK. Who may/may not know enough to setup a directional light :).

Godrays/Light Shafts Tutorial Using Directional Lighting
http://www.youtube.com/watch?v=CrUrUbfJBhc

on that note I have a forum as well I setup on my site. Think I made a post a few months back. If you guys have any questions about my video tutorials. Please please please post your question on my site. There are many reasons for this.

1) The new youtube comment layout is horrible for answering questions
2) Stuff get's pretty buried in youtube so questions somebody may have already answered may be 5 pages back.
3) I can sticky common questions so people can read and instantly know how to fix there problems and not have to wait for long reply's

Forum:
http://thumbaxisstudios.com/community/

Well that sums up this post I'm back and you can expect more advanced tutorials now :).

[Ovod]

Thanks, Raven. Your tutorials are very useful and cognitive:)

[Raven67854]

I just posted another tutorial on godrays only this time it's a really quick look at using point lights instead of directional lights.

Godrays using Point Lights:
http://www.youtube.com/watch?v=scYtxM_kQ-Y

[II Patch]

hi raven, would you be able to make a video on how to create a soft body reactor in 3DS Max and import it to UDK?

[UDKUser]

your Teleporters video is mis linked :)


hi raven, would you be able to make a video on how to create a soft body reactor in 3DS Max and import it to UDK?
There's one of those in the massive 3d buzz

the physics videos
http://udn.epicgames.com/Three/VideoTutorials.html

[Hanger9]

Hey, I have just started learning UDK and game Development in the past 2 days, and I just want to say thank you all your videos were great and I can wait for the RPG Dev Videos, I am finishing up the 3DBuzz videos and started watching the the Eat3d video but I have to say yours are better than the Eat3D Introduction videos which I regret buying now when compared to how you explain.

Nice and Simple thank you.

To anyone reading this I reccomend you watch Raven's videos then go through the 3DBuzz videos, but skip the first 34 videos of the user interface introduction. Raven provides a great base to build on top of.

BTW your Teleporter and Kismet video links are flipped.

[QuasarTD]

I have to say i'm really looking forward to the RPG vids too.

[Zomy]

I'm not able to see ligthshafts from pointligths :(.

[Cheer]

hey, thank you for making these tutorials, im looking forward to you RPG tutorial :)

maybe a request: a scaleform tutorial, because other people made videos of it on youtube but i dont understand them (and their health graphic in those pretty much suck)

thankyou :)

[n321]

hey I too am interested in the RPG tutorials. What do you think the percentage is of the first installment completion? I’m trying to get inventory working similar to NWN2 and would love your expertise. I’m working with sapitu atm but trying to equip inventory using sockets has just been crazy.

[Ninjabuntu]

Upcoming tutorial:
Creating an RPG in the UDK From Start to Finish.

RPG as in role Playing game? Or RPG as in Rocket Propelled Grenade?

Honestly I could go either way with that...

[Raven67854]

Hey guys,

I have been working on the RPG tutorial series. I have the assets I need now. So all I have to do before I can begin releasing parts of the RPG tutorial series is I have to release a few more standalone tutorials so people will have full understanding of the RPG series. As it's not as hands on as some of my other tutorials. So all I have to do is release a basic intro into UnrealScript and after that I will slowly begin to unveil the RPG tutorial series :).

I also have a few other tutorials I hope to have done this weekend if I can find time. They are a Day/Night cycle using kismet and matinee, A introduction to the material editor(Have been meaning to make this one for a long time.) As well as continue and progress further with my kismet series. With any luck I'll some of this up tonight or at least by Sunday.

Second thing on my list is I am looking for an artist who would be willing to help me out with my tutorials. I make tutorials for other game engines as well however most of those already have alot of assets to work with. So if anybody here has any free time and your experienced with photoshop and 3dsmax. Or any variant of the two. Send me a pm, email or add me on msn. So we can work something out. Currently what has been delaying me with all of my tutorials is lack of art. I know I can use stock UDK artwork but where's the fun in that :P.

[Ninjabuntu]

Been wanting to learn how to make a day/night cycle in UDK for a little while... neat...

[Snufkin]

I cannot wait for your RPG Tutorials Raven!

[II Patch]

theres a thread about the day/night cycle but its nothing in depth and not a full tutorial and its just bits and pieces everywhere. i would and i would say many others would really like a tutorial on how to make a pleasant looking day/night cycle.

[Jcaulton]

With the June UDK Beta, the moving sun is super easy with basic Matinee.

http://www.youtube.com/watch?v=mURVvMrCSTA

1. Just use the new Procedural Skydome.
2. Add Actor > Add the dominant movable directional light.
3. Set up a Matinee sequence in Kismet to change the location of the movable directional light. Set the Matinee to play upon Level Loaded. Set the Matinee to Play after being Completed (so the sun goes around and around). Set the Movable directional light (the Sun) as the Matinee Object. Open Matinee, move your Sun to the noon 6AM position and add a key frame. Move the sun to about the 8 or 9am position and add another key Frame. You only need about 7-8 keys and it looks great.

The longer your Matinee is and the more frames you have, the longer your day and night cycle is going to be.

I've only spent about an hour on the new skydome, so if you get the stars to come out at night, let me know. :)

[Drakel101]

Raven, you're absolutely amazing. Can't wait for the RPG tutorial, closest thing I can find on the internet are people showing unfinished things off.

Thanks :)

[online|offworld]

Hey raven, let me know if there's anything I can do to help with your RPG tutes from the 3D art side of things...

(my website is www.showmethatagain.com)

[Ninjabuntu]

Just use the new Procedural Skydome.I've looked on UDN, Google and all over the place, but there seems to be no documentation as to how to make use of this.

All the you mentioned is easy enough to figure out and do, If not there is documents about that stuff online somewhere. But the ProcSky? Oh hell no. All you get is the knowledge it's there and that it being used. That is it...

hehehe.

Okay done *****ing. Resuming Student mode...

[KingBadger]

Raven, could you do a tutorial on physics actors. Watch the video on youtube of The physics dance. Would love to learn how that was done, know it was in kismet and useing tornado and explosion actors and animated in script through Kismet. Cheers bud

[neurosys]

I might making an entire tutorial on animation a character with body and facial animations. Would be a fairly large tutorial. Try googling for some. I will show how to import into the UDK but not sure I am gonna do a fully blown tutorial like that.

Did you make it? I'm mostly concerned with the process of getting the basic animations working, I can import the psk and psa but the animtree bit has me a bit thrown, still reading on it but if you already made a tut on this aspect, could you post a link to that?(I checked your youtube channel but didn't see one)

Thanks :)
Neurosys

[Jcaulton]

Hey Ninja, others are already working on great Day/Night Tutorials.

http://forums.epicgames.com/showthread.php?t=744541

[thommie]

any news on upcoming tutorials raven?

[Th3 Duk3]

any news on upcoming tutorials raven?

espesialy the one on RPG. :confused:

[keysmaster]

yes I'm really desperate on the RPG tutorial.
there is only 1 RPG tutorial for the Unity game engine.
would really love to see one for UDK cause I can't find anything of use on the interwebs

[sueds]

I mean to offend anybody but I think that asking for an RPG tutorial is a little bit too much. If you don't have a rough idea on how to accomplish that why don't you practice a little bit more with udk before trying to make a game type that usually requires a team and good programming skills.

[keysmaster]

I mean to offend anybody but I think that asking for an RPG tutorial is a little bit too much. If you don't have a rough idea on how to accomplish that why don't you practice a little bit more with udk before trying to make a game type that usually requires a team and good programming skills.

you are probably right, but if you look from the other side, a tutorial about creating a different style of game covers all the tutorials on this page and even more, and gives learners all the knowledge they need for majority of the engine.

I'm sorry but the documentation is poorly written, with almost no examples on how to use pieces of code, or why is that code written like that, etc.
We are not all scientists, game developers working in the industry for 10-15 years like some people here.
We are trying to learn just for the sake of it, because it's fun and because it's interesting.

[sueds]

I understand I'm artsit and I'm way more confortable using zbrush or maya than visual studio. I checked raven's youtube page and I don't think It's going to happened anytime soon (or ever). You better look into tutorial and do small games where you can learn from.

here a good place to start

http://www.moug-portfolio.info/index.php?page=tutorials

[keysmaster]

I understand I'm artsit and I'm way more confortable using zbrush or maya than visual studio. I checked raven's youtube page and I don't think It's going to happened anytime soon (or ever). You better look into tutorial and do small games where you can learn from.

here a good place to start

http://www.moug-portfolio.info/index.php?page=tutorials

thanks for the link

[Th3 Duk3]

Yip, that link is usefull, tx.

I suppose what I was looking for in the RPG tutorial, was actually how to set up an RPG in UDK. I can do most of the other stuff, made some maps for ut3, its just getting everything to work together for an RPG.

I understand it is a big task, no doubt. How about breaking it up in parts, starting with the basics of just setting it up, and lets work from there. All the other stuff I suppose could be found on seperate tutorials.

At least thats what I was expecting. Any other ideas?

[Gizmo_x]

thanks for the tutorials.

[kiz]

hey i just flipped from the start to the end of the thread im in a rush so sorry, just wonderd if there was an updated list of all the tutorials that are avaliable? just seen quite a few on page one, will alot of these still be usefull in the later versions of UDK? and raven a big thankyou from me in advance i have heard you name pop up a few times and have a feeling you will guide and help me alot.

Im creating a game much like Jazz jackrabbit and have a friend now helping me with some modeling if i need it, so any tutorials you feel might help me at all guys?

[Scytherx3]

Really looking forward to the RPG one, making a FPSRPG style game and could really use guides on how to make magic and spells (the XP system is being handled by someone else on the team who knows what he is doing)
Great guides, can't wait for the rest! :)

[dantdj]

These are pretty much the best tutorials I've learned from. Kudos to you, Raven.

[ETermin]

Great tutorials very helpful . If you can please make a tutorial on how to make a waterfall. I have looked around and have not seen anything on how to build one.

[arcreamer]

has raven released the RPG tutorial series yet?